Apply silicone to inside of end cap to be bonded. Ensure that enough is used to cover entire surface area of inside of end cap and at least half of its depth.
Press end cap onto end of FlexiBRITE24 extrusion, clean off silicone residue and allow to cure. NOTE: Silicone will take at least 24 hours to fully cure. It can cure in place on an installation as long as it is not disturbed while curing.
- Ideal for exterior and interior lighting applications such as sign perimeters, letters, symbols, accent stripes, borders, and open-face channel letters
- Field-bendable and field-cuttable to custom lengths, giving installers the freedom to create an endless array of profiles, contours, and patterns on the fly
- Daytime color when non-illuminated
