E-Zee Weblon No Show Fusible 1.65 oz. is a low profile, soft and sheer Cut Away stabilizer with a heat-activated adhesive on one side. It is ideal as a backing finisher that is applied to the back side of finished embroidery to achieve a soft and smooth feel against the skin.
How to use Backing Finishers
The heat activated side of E-Zee No Show Fusible 1.65 oz. has shiny dots visible when looking at different angles. After embroidering your design, turn the garment inside out to expose the back side. Lay a piece of E-Zee No Show Fusible 1.65 oz. over the back side of the design with the rough side down. Trace a trim line about ½” to ¾” larger than the finished embroidery. Be sure to round the corners and cut out. Place the piece over the design evenly with the shiny dot side of E-Zee No Show Fusible 1.65 oz. facing down. Fuse on by applying heat at 250° to 260° for approximately 10 to 20 seconds.
Please Note: Allow time for testing with the temperatures and time guidelines for best results.
