LORD® 406 acrylic adhesive in combination with LORD Accelerator 19GB can be used to replace welding, brazing, riveting and other mechanical fastening methods. The 406/19GB adhesive systems perform particularly well in low-temperature environments and applications that are subject to high impact or high peel loads.
LORD 406 acrylic adhesive, when mixed with LORD Accelerator 19GB, creates an adhesive system that bonds a wide variety of prepared or unprepared metals and engineered plastics. The 406-19GB adhesive systems are specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive.
LORD 406 acrylic adhesive can be mixed with either LORD Accelerator 19GB. LORD Accelerator 19GB allows precise control of the adhesive bondline thickness due to its content of glass beads.
Shelf Life
Typical shelf life is nine months when stored below 80°F (27°C) in original, unopened container. Storage temperatures of 40-50°F (4-10°C) are recommended. If stored cold, allow product to return to room temperature before using. Protect from exposure to direct sunlight.
LORD 406 acrylic adhesive is flammable. Do not store or use near heat, sparks or open flame.
Features and Benefits
Versatile – bonds a wide range of unprepared metals with minimal substrate preparation, as well as engineered thermoplastics including XENOY®, polycarbonate, ABS and acrylics.
Temperature Resistant – performs at temperatures from -40°F to +300°F (-40°C to +149°C).
Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV exposure.
Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.
UL Rated – when mixed with LORD Accelerator 19, adhesive system is UL 746C certified.
