Operating Lase-It is very simple. Each laser has its own on/off switch. After turning one or more switches on, hold each laser by its wheel between your forefinger and thumb then simply rotate and or fan to the precise location desired. Each Lase-It comes with 4 lasers. Use as many lasers required to outline your Lase-It.
- The bearings and lasers with alignment wheels are 2.75" out from the case on all 4 sides, making a total of 9.5"
- The top cover on lase-it is pre-threaded to fit a 1" black or galvanized pipe
- Each laser on lase-it is rated at greater than 5000 hr of operation when used under normal indoor conditions
- Lase-It runs on 110 V with a standard 2 prong plug
- Bearings used in lase-it are very tight tolerances so they will stay in the exact desired position while allowing for smooth rotation and fanning
- With lase-it we get faster printing with precise print placement on all screen printing
- With lase-it we will achieve faster setup times
- Laser alignment system used to assist screen printers, embroiderers, digital printers, cap printers and many other applications where accurate placement is essential